I would like to personally thank you for your purchase of the Wells Audio Enigma headphone amplifier. We know that you have many choices when it comes to your personal electronics and we deeply appreciate your choice of a Wells Audio product.

Please read the instructions carefully and completely before attempting to operate the unit. We recommend that you save this manual and the original packaging for future use.

WARRANTY

To activate the warranty, fill out the included warranty card fully and send in within 30 days of purchase.

REGULATORY COMPLIANCE AND SAFETY INFORMATION 

WARNING! To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.

CAUTION: To prevent electric shock do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. To reduce the risk of fire or electric shock do not remove cover. Please refer to an authorized dealer or to Wells Audio for qualified service personnel only.

The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of an electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit.

UNPACKING

The packaging for the Innamorata amplifier is simple, elegant and effective in protecting the Enigma during shipping. To remove the amplifier from it's packing, simply open the box, remove the amplifier and its foam end caps, and set it on a firm, flat, stabile surface, and then remove the foam end caps.  At this point we recommend that you check the amplifier carefully for any damage that may have occurred during shipping. Contact Wells Audio immediately if any damage is found.

It is important to keep all of the original packaging materials for any future need you might have to ship the amplifier. Shipping the Enigma headphone amplifier in any packaging other than the original packaging materials could result in voiding of the warranty repair coverage.

SAFETY INSTRUCTIONS

The unit should be connected to an AC power source of the correctly rated voltage. Never remove or modify the grounding feature of the connected AC power cord. Never expose the AC cord to excess heat or flame. The AC cord should fit firmly and securely into the chosen AC receptacle.

The unit should not be operated near water. If the unit is exposed to liquids serious damage can occur. Immediately shut the unit off and disconnect from the power source.

Make certain that the unit has proper ventilation during operation. Never block the slots located at the top of the unit and do not place the unit in a confined space during operation. These actions may result in damage to the unit due to overheating.

Never operate the unit with the cover off. Do not touch any internal parts. Damage to the unit may occur and serious injury or death may also result.

PROPER CARE

Do not use any cleaning products on your Wells Audio product. Instead, use a clean, non-abrasive cloth with clear water.

A proper break-in period is necessary before the unit will sound it's best. This allows for the establishment of of the cleanest conducting pathways and for the internal components of the unit to stabilize at their proper operating parameters. This is accomplished by simply playing music through the unit for a period of about 200 hours.

CONNECTION INSTRUCTIONS

Rear Panel-Located on the Enigma rear panel are unbalanced RCA connectors labelled right input and left input. Connect a pair of unbalanced interconnects terminated with unbalanced RCA connectors to these inputs from your chosen source component. Left channel from the source to left channel of the Enigma and right channel from the source component to the right channel RCa on the Enigma. Located at the center bottom of the Enigma rear panel is the IEC AC power inlet. To supply the unit with AC power plug your chosen power cable from the electrical wall outlet or power conditioner to this connector.

Front Panel-Located at the center position on the front panel is the volume knob. Rotating the knob in the clockwise direction will advance the volume. Rotating the knob in the counter clockwise direction will reduce the volume. Located above and flanking the volume knob are the polarity flip switches. With the switches to the right while facing the front panel the polarity is correct. With the switches flipped to the left the polarity will be reversed 180 degrees. Located directly below the polarity switches are the combination output connectors. These connectors will accommodate 1/4 inch stereo plug connectors as well as 3 pin XLR connectors. Used as 1/4 inch stereo plug connections the Enigma will accommodate 2 pairs of headphones at once. For those headphones that use a separate XLR cable for each channel the outputs can accommodate these types of headphones with the use of the outputs as XLRs. There are 2 blue LEds located lower right and lower left in the front panel. These will indicate when power is being supplied to the right and left channels. The power on/off switch is located at the center bottom of the front panel.

SPECIFICATIONS

OUTPUT POWER

50 watts rms into 8 ohms at 1kHz with no more than 0.025% THD

 FREQUENCY RESPONSE

+/- 0.25 dB from 7Hz to 35kHz

SIGNAL TO NOISE RATIO

-103 dB at full-power output

INPUT SENSITIVITY

0.85V RMS

GAIN

30 dB

INPUT IMPEDANCE

30k Ohms

DAMPING FACTOR

200, reference 8 ohms nominal

POWER CONSUMPTION

129 watts idle, 350 watts maximum

INPUTS

1 pair unbalanced RCA connectors

OUTPUTS

1 pair of combination XLR & 1/4 " stereo plug connectors

OPERATING VOLTAGE

120V, 220V, 230V, 240VAC power at 50 or 60 Hz

SHIPPING DIMENSIONS

19 inches W x 19 inches D x 12 inches H

SHIPPING WEIGHT

26 lbs. 

LIMITED WARRANTY

Wells Audio warrants to the original purchaser that each Wells Audio product is free of manufacturing defects for a period of three (3) years from the date of purchase from an authorized agent of Wells Audio. The warranty is only valid once the enclosed warranty card is fully completed and returned to Wells Audio within thirty (30) days of the purchase date. 

For the complete limited warranty, see http://www.wellsaudio.com/limited-warranty/.